When you have a web site or maybe an web app, pace is vital. The quicker your web site performs and then the quicker your apps operate, the better for everyone. Because a web site is just a collection of data files that communicate with one another, the devices that store and access these files play a vital role in website functionality.

Hard drives, or HDDs, were, until recent times, the most reliable devices for keeping information. However, in recent years solid–state drives, or SSDs, have already been gathering popularity. Look at our assessment chart to view if HDDs or SSDs are more suitable for you.

1. Access Time

Image

With the introduction of SSD drives, data access rates are now through the roof. Because of the completely new electronic interfaces employed in SSD drives, the typical data file access time has been reduced towards a all–time low of 0.1millisecond.

Image

HDD drives still take advantage of the exact same general data file access concept which was originally developed in the 1950s. Though it was significantly upgraded consequently, it’s slow compared to what SSDs are offering to you. HDD drives’ data access speed ranges between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Because of the same revolutionary solution that permits for speedier access times, you may as well appreciate greater I/O efficiency with SSD drives. They will accomplish double the functions throughout a given time when compared to an HDD drive.

An SSD can handle at least 6000 IO’s per second.

Image

Having an HDD drive, the I/O performance progressively improves the more you employ the hard drive. Nevertheless, in the past it gets to a particular cap, it can’t get swifter. And because of the now–old technology, that I/O limit is significantly less than what you could have with a SSD.

HDD are only able to go as far as 400 IO’s per second.

3. Reliability

Image

SSD drives lack any moving elements, which means there’s a lesser amount of machinery inside them. And the fewer actually moving elements you will find, the fewer the chances of failure are going to be.

The typical rate of failing of an SSD drive is 0.5%.

Image

As we have already observed, HDD drives use spinning hard disks. And anything that works by using plenty of moving elements for lengthy intervals is more prone to failing.

HDD drives’ typical rate of failing can vary somewhere between 2% and 5%.

4. Energy Conservation

Image

SSD drives are considerably small compared to HDD drives and also they do not have virtually any moving elements whatsoever. As a result they don’t create as much heat and need much less energy to operate and much less energy for cooling purposes.

SSDs consume somewhere between 2 and 5 watts.

Image

HDD drives can be renowned for being noisy; they are at risk from heating up and when you have several hard drives in a hosting server, you will need a different air conditioning system exclusively for them.

As a whole, HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

Image

SSD drives enable swifter data accessibility speeds, that, subsequently, encourage the processor to accomplish data requests considerably quicker and after that to return to additional jobs.

The typical I/O hold out for SSD drives is only 1%.

Image

Compared with SSDs, HDDs enable reduced file accessibility rates. The CPU must await the HDD to send back the required data file, saving its assets meanwhile.

The standard I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

The vast majority of our new web servers are now using only SSD drives. Our own lab tests have demonstrated that utilizing an SSD, the typical service time for an I/O request while performing a backup remains below 20 ms.

Image

All through the exact same trials with the same web server, this time around fitted out utilizing HDDs, overall performance was significantly slow. All through the web server back up process, the common service time for I/O demands ranged somewhere between 400 and 500 ms.

7. Backup Rates

Image

Referring to back–ups and SSDs – we have witnessed an amazing advancement with the back up speed since we switched to SSDs. Currently, a standard server back–up takes solely 6 hours.

Image

We made use of HDDs mainly for quite a while and we’ve pretty good comprehension of just how an HDD runs. Backing up a web server designed with HDD drives will take around 20 to 24 hours.

With 9 Cube Hosting, you may get SSD–equipped hosting services at cost–effective price points. The cloud hosting plans and the Linux VPS hosting packages contain SSD drives automatically. Apply for an hosting account with us and experience the way your websites can become better easily.

  • Service guarantees

  •  
  • Register now. There won’t be setup costs and you’ll have total root and SSH access to your server. 99.9% network availability is guaranteed.

  • Compare our prices

  •  
  • Effortlessly examine the allocations and features supplied by our Virtual Private Servers. Find exactly which VPS Hosting setup will give you precisely what you want to deal with your multi–media web presence comfortably.
  • Compare our hosting plans

  • Contact Us

  •  
  • We are on duty for you night and day to respond to any queries with regards to our VPS Hosting services. 1–hour response time frame warranty.